|
Hydraulic Variable Rake Angle Shears
Cap.: 3mm to 20mm Length 1500 to 4000mm.
Application: Sheet cutting, Sheet Bending, Forming, Punching, Embossing .
Design of Operating Features of Hydraulic Synchronized Variable Rake Angle shears
- Mono block welded steel rigid to deflection tensile movement
- Easy of accurate gap adjustment of blades for bur free cuts
- Polyamide surface Hydraulic hold down cylinders of prevent sliding of the plates during cutting operating
- Motorized back gauge with electronic digital readout
- Electronically adjustment rake angle as per material of thickness for twist free cuts
- Synchronized Beem guided system for constant gap between blades
- Extra capacity to cut hard thicker plate than nominal capacity
- Blades produced from high alloying steel with functional four side
- Adjustable cutting and clamping force for quality cutting and power saving
- Rapid cutting of short pieces be electrical stroke adjustment system
- Hold down Cylinders for clamping
- Finger guard for operator safety
- Hardened and chrome bars for safe feeding
- Front sheet supports
- Left squaring arm with hardened and ground liner and stopper scale
- Lever for blade gap adjustment.
Higher
than required rake angle causes twisting of sheet. Hence even heavy
capacity shears need to reduce the rake angle for cutting lower
thickness. Variable rake shear provide this facility.
Model
|
Shearing Length mm
|
Nominal rake angle
|
Maximum rake angel
|
Nominal rake angle
|
Maximum rake angle
|
Raka angle
|
Raka angle range
|
Strokes minute at min and max rake angle
|
Hold downs
|
Hodding Force Kgs
|
Power H.P
|
Packing Dimension mm (LxWxH)
|
Approx Weight Kgs
|
HVR825
|
2500
|
8
|
10
|
6
|
8
|
2°
|
0.5-3° |
24-8
|
13
|
16500
|
20
|
3300x2350x2600
|
7500
|
Standard Feature and Accessories For Hydraulic Shear
- Moving beam synchronized by differential cylinders
- Hardened rollers guide beam for constant blade gap
- Blade gap easily adjustable by calibrated levers
- Rake angle adjustable to suit thickness and material
- Activation from consol and movable foot switch
- Sheet clamped Hydraulically before cut starts
- Stroke length position can be set for short jobs
- Beam returns on releasing foot switch for smaller cuts
- Cutting area illuminated for clear view of ends
- First two hold downs spaced closer at both ends
- Squaring arm 600mm at right helps distribute wear
- Front gauging by stopper scale on squaring arm
- Hardened rods on table for safe easier feeding
- Two front supports for supporting longer plates
- Front operated motorized back gauge 1000mm travel with D.R.O
- Compact low maintenance of silent hydraulic system
- Dependable international brands of hydraulics electrical
- Digital stroke counter
- HVR 315, HVR320, HVR325, HVR330 Have sheet supports, manual back gauge and left squaring arm of 600mm length.
Optional Accessories
- Automatic contact shearing
- Hydraulic Rear sheet supports
- NC Back Guage with ball screw.
|
